| Image error |
- Adjust the printing area
- Adjust the rising timing of the printing roller
- Image error and operation |
- Space motor error
- White Voltage adjustment |
| |
| Master making error |
- Adjust the master detecting sensor
- Adjust the master loadunload position
- Adjust the pressure of the master delivery plate
- Adjust the tension of master making belt |
- Adjust the voltage of thermal head
- Light No 3 is on, show “no master loading”
- Light No 3 is on, show “remnants master in the paper feeding part”
- Light No 3 is on, shows“cut motor malfunction” |
| |
| Paper feeding error |
- Adjust the gap of paper separator pawl
- Adjust the image position sensor
- Adjust the interval of paper feeding magnet
- Adjust the length of first paper feed
- Adjust the position of left paper jam sensor
- Adjust the pressure of the friction pad
- Adjust the second paper feeding length
- Adjustment the cam gap |
- Feed timing adjustment, feed cam adjustment
- Install the paper feeding roller
- Light No 5 is on, display middle paper jam
- Light No 6 is on, display left paper jam
- Light No 6 on ,show add paper
- Light No. 7 is on, right paper jam or disposal box open
- Paper separator device adjustment
- Second paper feeding pressure adjustment |
| |
| Unloading error |
- Adjust the master load and eject position sensor
- Adjust the position of waste master full switch
- Adjust the waste master detecting sensor |
- Cut when one-third master making
- Light 4，Show ' The clamp motor problem'
- Light No 4 is on, the disposal master box is full |
| |
| Clamper error |
- Adjust the AC Mode Position
- Adjust the B Mode
- Adjust the Synchronous Belt of the Clamper |
- B Mode Standard Position
- Clamp Error
- Master onoff combination |
| |
| Drum error |
- Adjust the stop position
- light No 5 is on ,display no drum
- light No 5 is on, the drum be locked |
- light No 5 is on, the ink is over
- Replace cloth screen
- The home position of drum |
| |
| Electronic error |
- Coder sensor
- Display top cover open
- light No. 5 is on |
- Main motor locked
- Power protect
- System Error |
